Some Videos of Past Projects

Here's a link to some Arduino projects of the past.

Honors Physics II: Week of 9/22/2014

We've done a number of online activities this week. In an effort to avoid confusion, here is a summary:

• Arduino project research: Find three interesting/cool Arduino projects that someone else has created and shared online. Send (email) me a link and/or quick description of all three of them to get full credit. (Due Monday, September 22)
• Initial project details: Complete an online form outlining your initial plans. Don't go into much detail in the materials section... ... we're going to tackle that today. (Due Wednesday, September 24)
• Electronic components order form: Complete an online spreadsheet that lists your required electronics materials. Whether or not your component will be able to reused will largely determine if the school will be able to purchase it, so please consider this. Please try to find the needed objects according to the list of "options."

Knight Rider!

Photo by ryanmoto, used with CC licence.

Now that we've defeated some evil pigs over on Code.org, let's try our hand at using loops in the Arduino programming language. Rather than start from scratch, use the excellent tutorial that can be found at Arduino.cc (http://arduino.cc/en/Tutorial/Loop). Try to find 6 matching LEDs so your effects will look really cool.

Arduino Project 1

Introduction:
It's time to put what we've learned together into a (basic) project. Here's what we've worked on so far:

• Connecting the Arduino to a computer
• The Arduino IDE and uploading sketches
• Using jumper wires with a solderless breadboard
• Safely powering LEDs with Arduino
• Using pins on Arduino as digital outputs and digital inputs
• Using a momentary push button switch to indicate a logic state
• Various Arduino commands and syntax, including

• defining and assigning variables
• pinMode()
• digitalWrite()
• digitalRead()
• if()
• else()
• delay() 

At this point, you don't need to be an expert on all of the above-mentioned topics, but you should at least have a basic recollection of what we did and how they work. Go back and revisit our previous activities if necessary before continuing with this project.

Click through the break to begin this project:

A Toggle Button

Copy and past the code below the line of asterisks:

**********************************************

// Working on a Toggle Switch // // September 10, 2014 // int mode = 0; // a variable to store whether it's "on" or "off" int oldMode = 0; // stores the previous mode int buttonState = HIGH; // a variable to tell whetehr or not the button is depressed int oldButtonState = HIGH; // stores the previous state int buttonPin = 5; // your's may be different void setup() { pinMode(buttonPin,INPUT_PULLUP); Serial.begin(9600); } void loop() { buttonState = digitalRead(buttonPin); // reads in whether or not the button is depressed if(buttonState == LOW && oldButtonState == HIGH) // is this is newly pressed button? { // the code that's inclosed here in these braces only is executed when it's a new button press if(oldMode == 0) { Serial.println("on"); // print "on" mode = 1; // sets the new mode to "on" } if(oldMode == 1) { Serial.println("off"); //print "off" mode = 0; // sets the new mode back to "off" } oldMode = mode; // updates the oldMode so that it is current } delay(50); // pause 50 milliseconds to "debounce" the button to avoid accidental double-presses oldButtonState = buttonState; // updates the old state so that it is current }